Trendnet Security Camera Pan/Tilt Internet Camera Server Manual de usuario descargar pdf (Pagina 24)

- 23 -

3.3 Configuring the IP Address of the PC

If you are failed to access to the camera, please check the IP

address of your computer. When you connect the camera to your

computer directly to proceed with configuration of the camera, you

need to set up the IP addresses to be in the same segment for the

two devices to communicate.

1. On your computer, click Start > Control Panel to open the

Control Panel window.

2. Double-click Network Connection to open the Network

Connection window.

3. Right-click Local Area Connection and then click Properties

from the shortcut menu.

4. When the Local Area Connection Properties window appears,

select the General tab.

5. Select Internet Protocol [TCP/IP] and then click Properties to

bring up the Internet Protocol [TCP/IP] Properties window.

6. To configure a fixed IP address that is within the segment of the

camera, select the Use the following IP address option. Then,

enter an IP address into the empty field. The suggested IP

address is 192.168.xxx.xxx (x is 0~254, please avoid same IP

address with your network devices), and the suggested Subnet

mask is 255.255.255.0.

7. When you are finished, click OK.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 99 100

Sin comentarios

Trendnet Security Camera Pan/Tilt Internet Camera Server Manual de usuario Pagina 24