Trendnet 802.11g Manual de usuario

User’s Guide 0 TEW-410APB Wireless 802.11g AP User’s Manual Version 1.4

User’s Guide 10 -WPA RADIUS WPA RADIUS uses an external RADIUS server to perform user authentication. To use WPA RADIUS, enter the IP address o

User’s Guide 12 4.3. Operating Mode Access Point: This mode provides access for wireless stations to wired LANs and from wired LANs to wirele

User’s Guide 14 4.4. Status This screen displays the IEEE 802.11g AP's current status and settings. This information is read-only. This pa

User’s Guide 16 4.6 Access Control Access Control: This function will allow administrator to have access control by enter MAC address of client

User’s Guide 18 RTS Threshold: This value should remain at its default setting of 2346. Should you encounter inconsistent data flow

User’s Guide 20 4.9. Upgrade Firmware To perform the firmware upgrade action, please go to the System section. Firmware Upgrade: Click the Fi

User’s Guide 22 5. Troubleshooting Basic Functions My Wireless AP will not turn on. No LED’s light up. Cause: The power is not connected.

User’s Guide 2 Contents 1. Introduction...

User’s Guide 4 2. Safety Notification Your Wireless AP should be placed in a safe and secure location. To ensure proper operation, please k

User’s Guide 6 4 Web Management Settings START UP & LOGIN In order to configure the Wireless 11g AP, you must use your web

User’s Guide 8 Wireless: This section provide the Wireless Network settings for your WLAN Wireless Settings SSID: The service set identifier