Trendnet TEW-435BRM Manual de usuario descargar pdf (Pagina 10)

Installation

2. Connect LAN Cables

Use standard LAN cables to connect PCs to the Switching Hub ports on the TEW-

435BRM. Both 10BaseT and 100BaseT connections can be used simultaneously.

If required, connect any port to a normal port on another Hub, using a standard LAN cable.

Any LAN port on the TEW-435BRM will automatically function as an "Uplink" port

when required.

3. Connect ADSL Cable

Connect the supplied ADSL cable from to the WAN port on the TEW-435BRM (the RJ11

connector) to the ADSL terminator provided by your phone company.

4. Power Up

Connect the supplied power adapter to the TEW-435BRM and power up.

Use only the power adapter provided. Using a different one may cause hardware damage

5. Check the LEDs

• The Power LED should be ON.

• The Status LED should flash, then turn Off. If it stays on or blinking after 60 seconds,

there is a hardware error.

• For each LAN (PC) connection, one of the LAN LEDs should be ON (provided the PC is

also ON.)

• The WLAN LED should be ON

• The WAN LED should be ON if ADSL line is connected.

For more information, refer to Front-mounted LEDs in Chapter 1.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 80 81

Sin comentarios

Trendnet TEW-435BRM Manual de usuario Pagina 10